Tom Wishon 919TH Driver at The Golf Shed

Features

- Extended 113mm face to back dimension positions mass farther from the CG to increase the MOI to >5,000 g-cm2

- The 919THI faces are designed to offer a superb combination of both on and off-center hit distance. TWGT is truly proud of its face design capability and the 919THI face is a perfect example of how that skill translates into outstanding performance.

- The elongated back design pushes the CG to a point of 48mm back from the face to offer a higher launch angle without having to increase loft. Each 919THI loft launches the ball 1 to 1.5 degrees higher than the same loft on our models 915CFE and 525GRT

- TWGT's extended back design shape sets up beautifully at address and allows golfers to play with a 5,000 g-cm2 MOI without having to accept a radical shape.

- Finished in a cobalt royal blue gloss with satin polish highlights. Available in RH in 9°, 11° and 13° High Launch models. Left hand 10.5 degrees.

- TWGT research has proven that MOI increases at a rate of 33 g-cm2 for each one gram of added headweight. When building the 919THI drivers to 45" length, the MOI will be 5,000 g-cm2. But as the 919THI drivers are assembled to shorter lengths, the MOI increases to a point of being more than 5,400 g-cm2 when built to a length of 43.5

919THI Driver

919THI Specifications

Head Volume Loft Lie Face Angle Weight Bulge Roll Face Prog.

1-450 460cc 9 ° 58° 0° square 203g 13" GRT 18mm

1-450 460 11 58 .5 closed 203 13 GRT 19

1-450 460 13 58 1 closed 203 13 GRT 20

919THI Dimensions

Head Face Ht. Face Width Front-Back Bore Diam. Hosel OD Bore Depth Face Area MOI Izz

1-450 53mm 103mm 113mm 0.335" 13mm 35mm 4800 mm2 5004g-cm2

1-450 53mm 105mm 113mm 0.335" 13 35mm 4800 mm2 5015g-cm2

1-450 53mm 105mm 113mm 0.335" 13 35mm 4800 mm2 5025g-cm2

Face material: 4.5Al-3V-2Mo-2Fe Titanium

Driver body: 6/4 - Titanium

Face construction: Forged Variable Thickness

Swingweight Bore: Yes, 7.5mm diam. x 15mm

Ferrule required: Yes, any 13.0 OD x 0.335" ID

Hand Select Options: +/- 1° loft, lie, face angle

+/-2g headweight

Scorelines: Laser cut, 0.8mm x 0.25mm

ProForce V2 graphite shaft really works well in this new driver.